Victron Energy PIN122120200 12/1200 Phoenix Direct Schuko Pure Sinewave Inverter
Victron Energy 12/1200 Phoenix Direct Schuko Pure Sinewave Inverter: The Inverter Chargers From Victron Energy Have Been Designed to Be a True Worldwide Product
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
Victron Energy PIN122120200 Features:
Fully configurable
- Low voltage alarm trip and reset levels
- Low voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage: 210 – 245V
- Frequency: 50Hz or 60Hz
- ECO mode on/off and ECO mode sense level
Monitoring
- In- and output voltage and alarms
Specifications:
- Cont. power at 25°C: 1200VA
- Cont. power at 25°C / 40°C: 1000 / 850W
- Peak power: 2200W
- Output AC voltage / frequency (adjustable): 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%
- Input voltage range: 9,2 - 17
- DC low shut down (adjustable): 9,3
- Dynamic (load dependent) DC low shut down (fully configurable): Dynamic cut-off
- DC low restart and alarm (adjustable): 10,9
- Battery charged detect (adjustable): 14,0
- Max. efficiency: 90%
- Zero-load power: 6,5
- Default zero-load power in ECO mode (default retry interval: 2,5 s, adjustable): 1
- ECO mode stop and start power setting: Adjustable
- Protection: a - f
- Operating temperature range: -40 to +65°C (fan assisted cooling); Derate 1,25% per °C above 40°C
- Humidity (non-condensing): max 95%
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Victron Energy 12/1200 Phoenix Direct Schuko Pure Sinewave Inverter: The Inverter Chargers From Victron Energy Have Been Designed to Be a True Worldwide Product
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
Victron Energy PIN122120200 Features:
Fully configurable
- Low voltage alarm trip and reset levels
- Low voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage: 210 – 245V
- Frequency: 50Hz or 60Hz
- ECO mode on/off and ECO mode sense level
Monitoring
- In- and output voltage and alarms
Specifications:
- Cont. power at 25°C: 1200VA
- Cont. power at 25°C / 40°C: 1000 / 850W
- Peak power: 2200W
- Output AC voltage / frequency (adjustable): 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%
- Input voltage range: 9,2 - 17
- DC low shut down (adjustable): 9,3
- Dynamic (load dependent) DC low shut down (fully configurable): Dynamic cut-off
- DC low restart and alarm (adjustable): 10,9
- Battery charged detect (adjustable): 14,0
- Max. efficiency: 90%
- Zero-load power: 6,5
- Default zero-load power in ECO mode (default retry interval: 2,5 s, adjustable): 1
- ECO mode stop and start power setting: Adjustable
- Protection: a - f
- Operating temperature range: -40 to +65°C (fan assisted cooling); Derate 1,25% per °C above 40°C
- Humidity (non-condensing): max 95%
